Level 3 Inspection, Author at Level 3 Inspection - Page 6 of 13

Author Archive

IGT press release

Maintenance outage inspection has never been easier.
Reduce downtime with the best on-site inspection.
On-site inspection — anywhere on the planet!

We’re proud to announce our highly successful recent on-site turbine inspection at a Siemens plant in Berlin.

Press Release

White Light Scanning Pros

As design engineers with decades of experience in industrial gas turbine engine production and analysis, we at L3I understand the requirements and challenges of inspecting complex free-form geometry. We’re raising the standards for:
  • Maintenance outage inspection
  • Catastrophic failure consulting
  • Root cause analysis
  • First article inspection (FAI)
  • Part-to-part comparison
  • Process optimization
  • Prototype verification
  • Production inspection
  • Component lifespan estimates
  • CAD modeling & model validation
  • Multiple cavity dimensional analysis
  • Statistical process control (SPC)
  • Tooling inspection and optimization
  • Product Modernization™ (reverse engineering)
LEARN MORE HERE (will link back to flyer)
Copyright © 2012 Level 3 Inspection LLC, All rights reserved.

Product Modernization­™ … it’s reverse engineering for grown-ups. (Aerospace)

Got a complex legacy part? Need a good CAD model fast?
Call Product Modernization Associates at 561.775.7911 today for a quote!
Receive a fully-parametric feature-based model for the CAD platform of your choice
… in just days.

Click here to learn more.

Product Modernization­™ … it’s reverse engineering for grown-ups.

STUART, FL • WARSAW, IN
561.775.7911 • 574.383.9145

Copyright © 2011 Level 3 Inspection LLC, All rights reserved.

Product Modernization­™ … it’s reverse engineering for grown-ups. (Medical Devices)

Got a complex legacy part? Need a good CAD model fast?
Call Product Modernization Associates at 561.775.7911 today for a quote!
Receive a fully-parametric feature-based model for the CAD platform of your choice
… in just days.

Click here to learn more.

Product Modernization­™ … it’s reverse engineering for grown-ups.

Copyright © 2011 Level 3 Inspection LLC, All rights reserved.

Press Release – Outcome Based Business Model

L3I Unveils Outcome Based Business Model

WARSAW, Ind., August 12, 2011 — Level 3 Inspection has announced an Outcome Based Partnership (OBP) hybrid business model based on vested interest partnership and proven time-to-market (TTM) savings. Long respected for advanced dimensional inspection and accelerated process optimization, L3I’s new OBP-based services are helping precision manufacturers reduce TTM and roll out innovations sooner than their competitors — at no front-end cost.

“Precision manufacturers look for any edge to get their products out faster,” said L3I’s COO, Scott McAfee. “We use our tools and expertise to save TTM. We save them millions!” Since each day’s delay in TTM can easily cost a manufacturer tens of thousands of dollars, trimming just a few weeks from a months-long development program can save substantial money and restore first-mover market advantage.

“We’ve got decades of experience in solving vexing engineering problems,” said L3I’s CEO, Bill Greene. “We eliminate our customers’ extraneous iterations and use tenthousand times more information to solve problems, save time and money.”

L3I is offering to become a strategic ally in a technology partnership with clients, to be compensated a share of time and cost savings due to TTM process optimization after such savings have been demonstrated.

“By requiring zero money down, we can prove our capabilities at no risk to the customer,” said Midwest Regional Manager Mark McAfee. “We don’t make a dime till we save you time!”

“Studies have proved that L3I’s system and method of inspection for implants is as accurate or better than our CMM’s. Since the white light scanning processes have the required accuracy and can cover so much more of the feature surface, their data is a more accurate representation of true size and form.” – Metrology Director, Orthopaedic OEM

Further information can be obtained at 561-775-7911 or sales@level3inspection.com.

About the company:
Founded in 2008, Level 3 Inspection is an ISO 9001, AS9100 and AAAM 44.9 certified engineering firm. L3I is the world leader in WLS and CAI dimensional inspection services. Our background serving the biggest names in aerospace and medical devices provides us with an unrivaled understanding of dimensional fit against geometric form according to print and functional requirements. Learn more at www.level3inspection.com.

 

L3I Unveils Time-To-Market Outcome Based Partnership

Level 3 Inspection —
Process Optimization with TTM Reduction for Better Parts, Faster.
L3I Unveils Time-To-Market Outcome Based Partnership (OBP)

WARSAW, Ind., August 9, 2011 — Level 3 Inspection LLC (L3I), an ISO 9001, AS9100 and AAAM 44.9 certified process engineering and dimensional inspection firm, has announced a 21st-Century Outcome Based Partnership (OBP) hybrid business model based on proven time-to-market (TTM) savings.
In competitive precision industries like medical devices, aerospace and industrial gas turbine (IGT) engines for power generation, each day’s delay in TTM can cost the manufacturer hundreds of thousands or, in extreme cases, millions of dollars.  Faster product development and revision yields both short-term savings and long-term first-mover market advantage.
Long known for professional contract-based metrology and advanced dimensional inspection reports on quick turnaround, L3I is now offering comprehensive OBP-based process optimization services to help its precision manufacturing clients reduce TTM and roll out innovations sooner than their competitors.
Based on decades of expertise in applying the latest inspection and process-control tools to stubborn engineering and product development problems, L3I examines the entire development life cycle.  L3I’s direct and comprehensive problem-solving approach weighs structural flaws against the short-term and long-term bottom lines, identifies extraneous process iterations, and recommends time- and cost-cutting solutions.
“Our top orthopedic and aerospace clients are renowned in their markets for innovation,” said L3I CEO, Bill Greene.  “They’ve accomplished this in large part through a TTM advantage – they’re able to introduce the latest innovative technologies and practices ahead of the competition.”
To ease the transition for companies that are unaccustomed to the process optimization advantage that can be gained from computer-aided inspection, L3I is offering zero-money-down OBP’s.  Per agreement, L3I becomes a strategic ally, paid a share of time and cost savings due to TTM process optimization only after such savings have been demonstrated.
“Studies have proved that L3I’s system and method of inspection for implants is as accurate or better than our CMM’s. Since the white light scanning processes have the required accuracy and can cover so much more of the feature surface, their data is a more accurate representation of true size and form.” –  Metrology Director, Orthopaedic OEM
Further information can be obtained at 561-775-7911 or sales@level3inspection.com.
About the companies:
Founded in 2008, L3I has become the world leader in WLS and CAI dimensional inspection services. Our background serving the biggest names in aerospace and medical device manufacturing gives us an unrivaled understanding of dimensional fit against geometric form according to print and functional requirements. Learn more at www.level3inspection.com.
Smart Inspection Systems LLC was born in 2010 in response to orthopaedic manufacturers’ demands for faster inspection than their sister industries. Our flagship product, the SiS™, is an automated turnkey inspection solution that yields comprehensive visual reports with complete geometric form and dimensional pass/fail in just minutes. The SiS™ is custom-configured per the client’s needs, yet versatile enough for simultaneous use on multiple product lines. Learn more at www.smartinspectionsystems.com.
Copyright © 2011 Level 3 Inspection LLC, All rights reserved.

Your Source For Vendor Qualification

Level 3 Inspection and Smart Inspection Systems
Watch our YouTube video

Verify Your Supply Chain Vendors

It’s a global parts market.  As a leading precision manufacturer, you have hundreds of suppliers (in the United States and beyond) to choose from for your outsourced parts.  But in a competitive and high-stakes industry, in which tolerances can be as minute as a few ten-thousandths of an inch, it’s critical that supply-chain parts be faithful to model and print.

The supply chain is a cost-effective source of small or simple parts, but quality assurance is an ongoing challenge.  Trial-and-error verification of every new supplier is an expensive proposition.

So how can you be confident in your stream of supply chain parts, without breaking the bank and wasting valuable time?

Fast & Economical

Avail yourself of fast, modern, and economical Computer Aided Inspection (CAI) by a credentialed, independent and impartial third party.  Level 3 Inspection is an ISO 9000, AS 9100 and AAAM 44.9 certified engineering and inspection firm, and is among the world’s most competent practitioners of White Light Scanning (WLS)-based CAI.
In addition to contract inspection solutions, we also offer custom-configured systems.  Learn about our SmartInspectionStation™ (SiS™) by watching our YouTube video.

Objective Data, Smartly Managed

By coupling accurate and comprehensive surface scans with intelligent postprocessing, we can provide an objective, clear, and easy-to-understand index of part data, helping you choose quickly and easily from between part suppliers. And by tracing, tracking and trending the data over time, we’ll help you sustain a reliable supply of reliable parts – inexpensively!
Call 561.775.7911 today to schedule a discussion of application parameters and configuration criteria with an L3I engineer.
Copyright © 2011 Level 3 Inspection Midwest LLC, All rights reserved.

A New Paradigm in Orthopedic Cutting Tool Inspection

Level 3 Inspection and Smart Inspection Systems
Watch our YouTube video

Top Cutting Tool Performance

Given the rise of global supply chain competition, along with the projected annual growth rate of 8-10% in the worldwide medical device industry market, U.S. medical device manufacturers must continue their course of innovation.  Best practices, though crystallized, must constantly be reevaluated and revised where appropriate.

With literally hundreds of suppliers across the United States capable of producing spinal and TJR instrumentation, competition for lucrative OEM contracts is fierce.  Implant success depends on a number of factors – among which are the size, depth, and position of the hole in the bone.

So how can you make sure that your broaches and reamers will perform to an exceptional standard?

FORM before FIT

Cutting tool quality is critical and can depend on accuracy and truth-to-form of only a few thousandths of an inch.  Nonstandard or unanticipated wear patterns can have catastrophic consequences.  You as a manufacturer deserve the peace of mind of knowing the full geometry of your tooling – and not merely a few key dimensions.
Gain the Confidence of the Entire Geometry

Overseas suppliers have demonstrated a great willingness to apply inspection methods based on geometric form, and some are beginning to pull ahead of American manufacturers.  Why risk losing the best supplier contracts to other manufacturers by taking a trial-and-error approach to tooling development?
A Call to Action

Given the precarious situation in which the medical device industry finds itself – opportunity in exploding overseas markets coupled with threats from overseas competitors – there’s never been a more critical time to reexamine cherished misconceptions about what constitutes a reasonable standard of speed and quality in tooling development.  First movers will dominate share in their product category – perhaps permanently.  Let’s work together that they may continue to be fellow Americans.

Learn about the SmartInspectionStation™ (SiS™) by watching our SmartInspectionStation™ YouTube video.

Call 561.775.7911 today to schedule a discussion of application parameters and configuration criteria with an L3I engineer.
Copyright © 2011 Level 3 Inspection Midwest LLC, All rights reserved.

The Time-to-Market Advantage

Level 3 Inspection and Smart Inspection Systems
Watch our YouTube video.

Orthopedics is a competitive market with projections of 8-10% global annual growth over the next several years.  As such, best practices have crystallized over the years and decades.  American manufacturers can’t afford to ignore opportunities to reduce new product development time by 30% or more — and improve product revision rates by upwards of 50+%!

If you snooze, you lose.

As you probably know, good design in total joint replacements depends on good geometric understanding.  Engineering misjudgments of mere microns can ruin the outcome of a joint replacement – resulting in expensive recalls, product scrapping, and lost time in product development.
In product manufacturing process development, a trial-and-error approach to form and function can result in dozens of redundant and ineffective iterations where one or two well-founded iterations might have been sufficient.  This is all to common in some major American orthopedic companies.
Foreign competitors throughout precision manufacturing – especially but not exclusively what we increasingly refer to as “Brand China” – have proved themselves receptive to new ways of improving part quality, while still decreasing cost, weight and time to market.  As we’ve seen in other industries, if foreign manufacturers gain the lead over their American counterparts, they won’t give it back.
And domestically, as Don Urbanowicz explained in his keynote address at the OMTEC 2011 trade expo, forthcoming changes in FDA regulatory policy will increase the “First Mover Advantage” still further.
Discover your custom-configured inspection options by watching the

There’s ground to be gained … or lost.

Given the double-edged situation in which the medical implant industry finds itself in 2011 – facing an opportunity in exploding overseas markets but also a potential threat in overseas competition – there has never been a more critical time to examine cherished misconceptions about what we can expect of product development speed.  First movers will dominate share in their product category – perhaps permanently.  Let’s work together that they may continue to be fellow Americans.


Learn more today.

Call 561.775.7911 today to schedule a discussion about application parameters and configuration criteria with an L3I engineer.

Copyright © 2011 Level 3 Inspection Midwest LLC, All rights reserved.

Invitation — See the SiS™ during OrthoTec 2011!

INVITATION — OrthoTec 2011
SiS™ Demo and Lab Tour

Come and see us demonstrate the SiS™ at our Warsaw, Indiana lab!
Can’t see the video? Click here.

We’ve already proudly announced the unveiling of the Smart Inspection Station™ (SiS™) at OrthoTec 2011 in Winona Lake, Indiana.
Here’s your official invitation to join L3I in our Warsaw laboratory to see the SiS™ in action.
Please visit us at Booth 200 on the OrthoTec exposition floor, where we’ll be displaying and demonstrating our DT-1™ scanner.  This will be your opportunity to meet the L3I management and staff, and to sign up for the demonstration and tour time that best suits you.
We’ll be providing transporation to and from our lab (3123 East Center Street — only minutes from the expo floor).  Refreshments will also be provided.  The demo and question-and-answer session will take about 45 minutes, after which you’ll be whisked back to OrthoTec.
Additionally, we’ll be hosting an open house and cocktail hour on Tuesday, May 24 from 5:30 p.m. to 7:30 p.m. for those who can’t attend one of our organized tours during the day — or who simply wish to linger with us.
See you at the show!

Sincerely,

Bill Greene, CEO
sales@smartinspectionsystems.com
Direct: 561.775.7911

Level 3 Inspection • Smart Inspection Systems
STRATEGIES • SOLUTIONS • SYSTEMS • SUPPORT
AS9100 & ISO9001 Registered • AAAM 44.9-2010 Certified • CAGE Code 5UXW8
Stuart, FL 34997 • Warsaw, IN 46582

Please consider the environment before printing this email.

This message and any attachments are intended only for the named recipient(s) and may contain confidential, privileged or otherwise legally protected information.  Unauthorized disclosure of, or taking any action in reliance upon this information by others than the named recipient is prohibited.  If you have received this message in error please inform the sender and purge from all computers.
Copyright © 2011 Level 3 Inspection Midwest LLC, All rights reserved.

MENU