July 2014 - Level 3 Inspection

Archive for July, 2014

Level 3 Inspection LLC Named Top Finalist in the 2014 Florida Companies To Watch Awards Program

Level 3 Inspection Selected as Martin County First Round Finalists For 2014 Florida Companies to Watch

View The Online Version
   Share this email with your network on LinkedIn
Level 3 Inspection
Martin County Florida
The Business Development Board of Martin County
is the county’s official economic development organization,
and Enterprise Florida, Inc. partner. More information about
the organization can be found by visiting www.bdbmc.org.
Florida Companies to Watch
L3I: Named Top Finalist!

Stuart, FL (July 3, 2014) The Business Development Board of Martin County (BDBMC) is proud to announce that six local companies have been selected as finalists for the 2014 Florida Companies to Watch. In its fourth year of celebrating entrepreneurship, the annual Florida Companies to Watch awards program is presented by GrowFL, in association with the Edward Lowe Foundation. Chosen from a pool of more than 150 second-stage growth companies, these finalists represent nearly $600 million in annual revenue and employ more than 2,800 full-time equivalent employees.
Way to go Level 3 Inspection! Congratulations on being one of the top finalists! Good Luck!

L3I: Engages Clients

Everywhere we are engaged with our precision manufacturer clients, we are delivering vastly superior Computer Aided Inspection (CAI) Customer- Ready™ results, which OEMs welcome and prefer, and we are delivering them in a half to third of the time it takes to get lesser results out of the internal layout department and traditional inspection resources.  We have made large impacts at a number of our clients, helping them perform on substantial programs to keep their customers happy.

L3I: Scanning the Horizon

Horizons
Would you like to know more about Level 3 Inspection? We were interviewed by Desktop Engineering’s resident blogger and senior editor, Kenneth Wong for his recent article “Scanning the Horizon for Automated Inspection.“
Level 3 Inspection
Unsubscribe | Manage Preferences | Forward to a Friend
Level 3 Inspection | 1239 SE Indian Street – Ste 107 | Stuart, FL 34997 | United States

Level 3 Inspection
 
ELIMINATE INSPECTION BACKLOG NOW! 
Overwhelming Supply
 
Do you have lead time challenges? L3I can speed up your inspection, solve your backlog and accelerate your shipment.
 
If you are like a great many of our clients, you have literally piles of parts in your plants that are ready to be shipped to your customers, pending meeting the inspection conformance requirements. And your inspection department is probably already backed up for weeks, or even months, so the revenue and profits realization from those completed parts remains far too distant.
 
Most of our clients got started with using our services because of a backlog in their layout/inspection department. Then, once they saw that our results were even better than we said they would be, they continue to have us help them with our value promise of better precision parts, much faster, at lower cost and with greater confidence.
 
Let Level 3 Inspection professional CAI services relieve your inspection backlog with our fast turnaround times and comprehensive ‘customer-ready’ results portfolios. Our dedicated team of inspection professionals will deliver superior results, with process improvement recommendations if needed, faster and better than any other method.
 
Click here to watch the in action video of the automated, integrated Smart Inspection Station we use for parts inspection.
 
Faster time to market is everyone’s objective. Our advanced Computer Aided Inspection (CAI) services provides tremendous throughput advantages with greater product condition understanding, being faster and easier than any other measurement method.
 
If time is money for you, like it is for all of our other clients, give us a chance to positively impact your bottom line with our advanced Computer Aided Inspection services. Call today to tell us when you want the results, and let’s see how much backlog we can eliminate for you!
 
Sincerely,
Bill Greene

Bill Greene – CEO
3D Scanning & Computer Aided Inspection Master Practitioners
Metallurgical Engineers, Mechanical Engineers,
Precision Manufacturing Process Engineers
 

T: 772.405.7502

 
  

Level 3 Inspection
BETTER PRECISION PARTS, MUCH FASTER, AT LOWER COST & WITH GREATER CONFIDENCE FROM COMPUTER AIDED INSPECTION 
Precision Parts
CONFORMING PARTS IS OUR COMMON AIM
Whether you are a supplier, assembler or OEM – conforming parts matter!
If you are receiving conforming parts, it means that your product assembly can proceed smoothly without rework, or re-evaluation of requirements, or re-visitation of procurement contract terms.
If you are a supplier sending conforming parts, it means that you have your process well managed and you can have confidence that your parts will fit and perform the function intended without unexpected additional processing by your customer, or challenges to your contract.
For all parties involved, conforming parts matter to business efficiency, reliability, and ultimately profit and sustainability.
Through professional services and turnkey automated systems, we help our clients make better precision parts, much faster, with lower cost and greater confidence. Using 21st century dimensional inspection and geometric analysis tools (for the past 12 years) with our decades of precision manufacturing expertise, we can readily optimize precision manufacturing processes, usually in one step, dramatically cutting scrap and iterations, reliably saving months and often millions.
If your responsibilities include efficiency, throughput, and process yield of conforming parts, we should work together to explore how we can help you reach those objectives, for everyone’s benefit.
Click here to watch the in action video of the automated, integrated Smart Inspection Station we use for parts inspection.
Faster time to market is everyone’s objective and our advanced Computer Aided Inspection (CAI) services and Structured Light Metrology (SLM) systems provide tremendous throughput advantages, with greater product condition understanding, faster and easier than any other measurement method.
Let us show you and your suppliers how this benefits everyone! We look forward to earning your loyal partnership and fulfilling your precision manufacturing optimization needs.
Sincerely,
Bill Greene

Bill Greene – CEO
3D Scanning & Computer Aided Inspection Master Practitioners
Metallurgical Engineers, Mechanical Engineers,
Precision Manufacturing Process Engineers

T: 772.405.7502

Level 3 Inspection
 
L3I: Scanning the Horizon For Faster Throughput
L3I Scans The Horizon
 
Would you like to know more about Level 3 Inspection? We were recently interviewed by Desktop Engineering’s resident blogger and senior editor, Kenneth Wong for his recent article “Scanning the Horizon for Automated Inspection.” Kenneth did such a great job telling our story we would like to share it with you today:
 
About 5 years ago, Bill Greene and his colleagues at Level 3 Inspection (L3I) foresaw the need for precision 3D scanning and inspection in orthopedic implant manufacturing. So they opened an office to offer professional computer-aided inspection services in Warsaw, IN, known as the Orthopedics Capital of the World. The city owes its nickname to Revra DePuy, an early orthopedic appliance manufacturer who left his indelible mark there. Now, other industry leaders like Biomet, Zimmer, Medtronic and their supply chain partners are also part of the city’s economic landscape.

L3I is first and foremost a digital inspection service provider. Its bread and butter come from precision manufacturers who need to verify that the parts built conform to the design specified. To accomplish this, clients usually contract L3I to scan the part produced in the manufacturing facility, then compare the high-resolution digital scan to the original CAD geometry.

 
Precision Scanning OutputAn annotated page from Level 3 Inspection’s report on comparing an as-built orthopedic knee implant and the intended design. 
 
For all intents and purposes, L3I’s services seem like a perfect match for improving the quality of braces and implants commonly used in the orthopedic profession. Considering how costly a recall is for the manufacturer — and how devastating it is for the patient — the industry could clearly benefit from greater quality assurance.

But at the onset, Greene didn’t realize there was a fundamental difference that separates aerospace and automotive manufacturers from their orthopedic counterparts. “[Orthopedic manufacturers] love the result, but just aren’t comfortable outsourcing the job,” he reports. “They’d much rather buy the equipment and bring the operation in-house.”

So, instead of combatting the prevalent culture and tradition in orthopedics, Greene decided to adapt. L3I invented and applied for an international patent for an integrated, automated system that would perform the same computerized inspection operations, but could be used by a nontechnical operator. Thus, the Smart Inspection Station (SIS) was born.  Continue reading the full article here!

 
Everywhere we are engaged with our precision manufacturer clients, we are delivering vastly superior Computer Aided Inspection (CAI) Customer- Ready™ results, which OEMs welcome and prefer, and we are delivering them in a half to third of the time it takes to get lesser results out of the internal layout department and traditional inspection resources.  We have made some very big business impacts at a number of our clients, helping them perform on substantial programs to keep their customers happy.
 
Let us accelerate your product and business. Call us today for a quote, tell us when you need the results, and be prepared to be amazed at how well we can deliver with speed. 
 
Sincerely,
Bill Greene

Bill Greene – CEO
3D Scanning & Computer Aided Inspection Master Practitioners,
Metallurgical Engineers, Mechanical Engineers,
Precision Manufacturing Process Engineers
 

T: 772.405.7502

 
  

Level 3 Inspection
 
COMPUTER AIDED INSPECTION FOR BETTER PRECISION PARTS, FASTER RESULTS, LOWER COST & GREATER CONFIDENCE
 

sis imageLevel 3 Inspection (L3I) is the industry leading service provider of Computer Aided Inspection (CAI) and dimensional layouts from high-accuracy 3D scanning. L3I has invested in their own Smart Inspection Station™ (SiS™) to meet the quick turnaround times needed for production jet engine parts inspection contracts, won based on the superior results and fast delivery.

Smart Inspection Station
The patent-pending Smart Inspection Station™ (SiS™) was developed to meet the marketplace’s need for advanced CAI results in-house, at clients’ operations, for those precision manufacturers who prefer not to outsource dimensional inspections, primarily for lead times and/or proprietary information reasons.
 
Come hear CEO, Bill Greene,
speak at
 February 25-27, 2014
Seminar Includes:
  • Understand how 21st century CAI improves all aspects of aerospace production.
  • Make appropriate value judgments on where to apply modern 3D metrology for maximum ROI. Learn how to make or buy better precision parts, much faster, at lower cost and with greater confidence.
  • Discover technology leadership and strategic partnerships for applying these tools to cut 30-50% of the time it takes to optimize the manufacturing process (time to market).
RECENT PUBLICATIONS:
“A New Inspection Paradigm“ – ORTHOWORLD
 
Bill Greene
 
Our decades of collective experience in measuring and analyzing precision parts and assemblies over thousands of layouts have made us master practitioners of these modern tools for precision manufacturing process optimization.

Contact us today to discuss the services and systems capabilities we can deliver for your aerospace manufacturing needs.
 
Sincerely,
Bill Greene

Bill Greene – CEO
3D Scanning & Computer Aided Inspection Master Practitioners
Metallurgical Engineers, Mechanical Engineers,
Precision Manufacturing Process Engineers
 

T: 772.405.7502

 
  

Level 3 Inspection
 
Production Parts Inspection
 
Nascar Pit Crew
 
Fast and Accurate Layouts Increase Production Throughput
 
Improve your process throughput with precision inspection. With our substantial advances in Computer Aided Inspection (CAI) automation, integration and domain expertise our superior layout results are faster than ever. Gain the competitive edge from inspection comprehensiveness with millions of surface data points, accuracies certified to millionths of an inch, and the confidence these adventageous results can provide clients. These are the tools we use and benefits we provide at Level 3 Inspection.
 
We sell speed! Specifically, we provide superior dimensional quality inspection results faster than any other inspection method.
 
How do we do it? We offer production parts inspection with our automated Computer Aided Inspection (CAI) technologies. The CAI Pros at Level 3 Inspection want to perform your production inspection on parts up to 8” in dimension and we’re ready to make attractive pricing partnership deals for repeat and higher volume parts inspections that fit this work envelope.
 
Let us accelerate your product and business. Call us today (772) 405-7502 for a quote, tell us when you need the results, and be prepared to be amazed at how fast we can deliver. Let’s explore relieving your inspection department backlog with our advanced, advantageous, and fast repeat CAI capabilities. 
 
Sincerely,
Bill Greene

Bill Greene – CEO
3D Scanning & Computer Aided Inspection Master Practitioners,
Metallurgical Engineers, Mechanical Engineers,
Precision Manufacturing Process Engineers
 

T: 772.405.7502

 
  

Level 3 Inspection
DO YOU HAVE THE NEED FOR SPEED?

Top Gun
It’s not just for Top Gun pilots any more.


Everywhere we are working with precision manufacturers these days, there is an urgent need for faster, much faster throughput. This includes faster throughput in dimensional quality inspection, both first article inspections and production inspection.
Everywhere we are engaged with our precision manufacturer clients, we are delivering vastly superior Computer Aided Inspection (CAI) Customer- Ready™ results, which OEMs welcome and prefer, and we are delivering them in a half to third of the time it takes to get lesser results out of the internal layout department and traditional inspection resources.  We have made some very big business impacts at a number of our clients, helping them perform on substantial programs to keep their customers happy.
We sell speed! Specifically, we provide superior dimensional quality inspection results faster than any other inspection method.
How do we do it? We are master practitioners of the most advanced 3D scanning and dimensional inspection technologies and tools which we have been using on demanding precision parts for over a decade. With this solid foundation of domain expertise, we have highly integrated and automated as much of the scanning and data processing as possible, because it is the fastest way to get consistently high quality CAI process results with minimal human input. 
Let us accelerate your product and business. Call us today for a quote, tell us when you need the results, and be prepared to be amazed at how well we can deliver with speed. 
Sincerely,
Bill Greene

Bill Greene – CEO
3D Scanning & Computer Aided Inspection Master Practitioners
Metallurgical Engineers, Mechanical Engineers,
Precision Manufacturing Process Engineers

T: 772.405.7502

MENU