Mailings Archives - Level 3 Inspection

Archive for the ‘Mailings’ Category

OMTEC 2012 SmartInspectionStation™ Demo and “Choose All Three” Presentation

Meet us at OMTEC, Booth #831-833, June 13-14, 2012
Register to attend.
Presented by:
Bill Greene
Chief Executive Officer
Level 3 Inspection LLC

Price, Quality, Speed: Choose All Three

Thursday, June 14, 2012, 10:00 a.m. – 10:45 a.m.
Orthopaedic Manufacturing & Technology Exposition & Conference
Donald E. Stephens Convention Center, Rosemont, Illinois

Participants will learn about the advantages of Computer Aided Inspection for orthopaedic devices:

  • Make better parts faster, with fewer iterations, greater confidence and lower cost
  • SPC tracking and trending of dimensions to reduce sampling rates
  • Trim 30% from new product time-to-market (TTM), saving millions of dollars
  • Reduce legal exposure by avoiding expensive product performance liability problems

Witness the Power of the SmartInspectionSystem™!

The SiS™ is an easy-to-use fully-automated Structured Light Metrology (SLM) and Computer Aided Inspection (CAI) system that orthopaedic and other precision manufacturers can install practically anywhere in their operations.

This patent-pending system uses SLM in tandem with a programmable part positioner and Geomagic Qualify™ to digitize the surfaces of orthopaedic implants and other precision manufactured parts, automatically generating full PDF inspection reports in mere minutes, with minimal operator input and personnel training.

The SiS™ is highly configurable, offering scanning resolutions of 4, 5, and 11 (or more) megapixels, with measuring volumes ranging from 50-380mm (or bigger) to generate very high scan data density as needed per part, feature, and tolerance.

Come and see the SiS™ in operation at OMTEC Booth #831-833, June 13-14, 2012.

Register to attend.

Copyright © 2012 Level 3 Inspection LLC, All rights reserved.

The Future of Inspection, Part 4: Trackable

Integrating 21st century metrology into FDA-mandated quality systems provides many benefits.  Here are just a few…
In this email series, we’ve discussed the archiveability, auditability, and traceability of Computer Aided Inspection (CAI) data for reference and accountability. We now add trackability to CAI’s list of superlatives.

Failure analysis is a tricky business. As a rule, systematic investigation is more effective and far less expensive than haphazard trial and error. The faster and more accurately manufacturers gather information, the faster and more accurately they can find root causes and understand the limits of their process capabilities – saving time and money.

Vast quantities of trackable data, available only through CAI, enable intelligent deductive analysis, providing quick and effective tracking from why-gate through why-gate. There is no longer any need (or excuse) for expensive, repetitive iterations.

Once data have been tracked and root causes found, process capability can be enhanced through specific production measurement plans. Visit www.level3inspection.com or call us today to discuss the ways in which an in-house, traceable CAI system can suit your needs.

WARSAW, IN • STUART, FL
574.383.9145 • 561.775.7911
Copyright © 2012 Level 3 Inspection LLC, All rights reserved.

The Future of Inspection, Part 3: Archiveable

Integrating 21st century metrology into FDA-mandated quality systems provides many benefits.  Here are just a few…
Along with tamper-resistance, Structured Light Metrology (SLM)-based data are highly traceable.  When every step in manufacturing can be linked to a comprehensive dimensional inspection process, metrology loses its anonymity.

In this series, we’ve already discussed the archiveability and auditability of Computer Aided Inspection (CAI) -based inspection.  Gauge R&R studies demonstrate that CAI incorporates minimal operator-dependent error.

Modern CAI practices allow manufacturers to trace measurements to a precise date, time, and employee.  This results in a new level of accountability for engineering data.

Even better, CAI makes it possible to trace failures to their root causes quickly and effectively.  When manufacturers are able to find the cause of process failures quickly, they can alter their processes equally quickly – saving time and money.

Visit www.level3inspection.com or call us today to discuss the ways in which an in-house, traceable CAI system can suit your needs.

WARSAW, IN • STUART, FL
574.383.9145 • 561.775.7911
Copyright © 2012 Level 3 Inspection LLC, All rights reserved.

The Future of Inspection, Part 2: Auditable

Integrating 21st century metrology into FDA-mandated quality systems provides many benefits.  Here are just a few…
Correct information technology practice and data validation are key to avoiding minor headaches during your self-audits … or living nightmares when FDA inspectors knock on your door.

Computer Aided Inspection (CAI) tools save comprehensive surface data, instantly.  Every Structured Light Metrolgy (SLM) scan clearly and precisely demonstrates a part’s (or thousands of parts’) dimensions at a given process stage.

By using checksums and digital signatures, you can make your CAI data immune from tampering.  Manufacturers are discovering that by securing CAI data into a database that cannot be changed once logged, they can have incontrovertible evidence of a watertight quality system.

For the first time, thanks to CAI, you can prove that every surface point of your product was within spec at every point during manufacturing, allowing you to quickly and incontrovertibly dispatch regulators’ questions.

Visit www.level3inspection.com or call us today to discuss how an in-house, archiving CAI system can suit your needs.

WARSAW, IN • STUART, FL
574.383.9145 • 561.775.7911
Copyright © 2012 Level 3 Inspection LLC, All rights reserved.

Quality, Speed, Price: Pick Three

Read L3I’s latest BONEZONE article:
“Quality, Speed, Price: Pick Three”
We’ve done it again.

L3I’s CEO Bill Greene was featured in December 2011’s BONEZONE, a major orthopedic trade journal.  This time, Mr. Greene explains how modern, 21st century best dimensional inspection practices can help U.S.-based medical device manufacturers remain globally competitive.
A few excerpts:
“Engineering misjudgments of mere microns can necessitate an expensive recall. Modern computer aided inspection and analysis software can instantly ascertain geometric surface information, discern trends and catch new problems as they arise — before they begin to cost time and money.”
“By removing human interference, the SiS can create part scan files in as little as three minutes … Even if 100% inspection is required because of regulatory considerations, robotic part handling makes it practical. Quite soon, those costly inspection cells filled with dozens of workers … will be a memory.”

“An orthopaedic product revision had endured 18 successive process iterations, aided and abetted by an inspection team using optical comparators, CMMs and fixed gauges. We finished the product revision in only two iterations. If you’re doing the math, that’s better than an 85% reduction in cycles, and weeks. It’s time to relegate wasteful iterations to the ash heap of history.”

“Accurate and comprehensive geometric data allow engineers to diagnose and solve problems that might have vexed them for years. At least as important is the opportunity to incrementally streamline production based on real-time insights, which can then be driven back into the process to create a cost-effective production measurement plan.”

Read the full text of Mr. Greene’s paper here.
Avail yourself of fast, modern, and economical Computer Aided Inspection (CAI) by a credentialed, independent and impartial third party.  Level 3 Inspection is an ISO 9000, AS 9100 and AAAM 44.9 certified engineering and inspection firm, and is among the world’s most competent practitioners of Structured Light Metrology (SLM)-based CAI.
Visit www.level3inspection.com or call us today to discuss the best inspection solution for your device design or manufacturing needs.
WARSAW, IN • STUART, FL
574.383.9145 • 561.775.7911
SERVICES • SYSTEMS • SOLUTIONS
Copyright © 2012 Level 3 Inspection LLC, All rights reserved.

Holiday Greetings from Level 3 Inspection

Season’s Greetings from L3I

What’s on your wish list?

We at Level 3 Inspection deeply value our partners (and prospective partners) in medical devices and other close-tolerance precision manufacturing.

We’re curious about what your industry would most like to see from a leading U.S.-based metrology provider in 2012.

Click the image below to fill out your Holiday Wish List, which requires less than one minute to complete.

If the image doesn't load, please visit https://docs.google.com/spreadsheet/embeddedform?formkey=dDZTUmxVRGNmZFFvSlh5bjl2RTNPQlE6MQ fill out your Holiday Wish List.

Wishing you happy holidays and a prosperous new year!

Copyright © 2011 Level 3 Inspection LLC, All rights reserved.

The Future of Inspection, Part 1: Secure and Archiveable

Integrating 21st century metrology into FDA-mandated quality systems provides many benefits.  Here are just a few…
Secure and verifiable data archiving, for years the standard in aerospace inspection, is now under increasing demand for medical devices.

Medical device manufacturers face a number of inspection challenges – some common to all precision manufacturers, others unique to their industry.  Among these challenges are evolving design parameters and manufacturing methods, a deficiency in legacy part knowledge, and ever-stricter archiving standards imposed by many national regulatory agencies.

The truth is that today’s manufacturers should be archiving all inspection data.  Equally true is that design changes in the medical device industry remain too slow and far too expensive.  Faster innovation, faster product development, and faster manufacturing process optimization are keys to success in the increasingly demanding and competitive industry.  Manufacturers need legacy part information for reference in designing current/future product lines – to say nothing of reverse engineering legacy parts to make them better while using modern computer-aided technologies for production.  And with the glut of lawsuits and regulatory inquiries, manufacturers need to arm themselves with greater information resources and faster, easier access to their own dimensional, quality, and other manufacturing data.

Traditional inspection methods don’t solve any of these problems.  CMM’s don’t archive data automatically (if at all), at best churning out an unverifiable table of numbers.  Optical comparators and fixed gauges don’t output data, but instead rely on the non-reproducible eyes of inconsistent shop floor employees.  Fortunately, modern technological solutions now exist that automatically and verifiably collect, analyze, report, disposition and archive all dimensional manufacturing process and resulting product information as decisionable data, for a myriad of uses.

Such data can be made demonstrably tamper-proof for defense against litigation and in regulatory requests for information, via checksums and digital signatures.  Manufacturers can review past process and part data for quick and efficient reference, trending, SPC, CAD model creation, and many other applications.  Best of all, self-contained integrated and automated Computer Aided Inspection (CAI) systems can be installed in manufacturers’ facilities, minimizing turnaround time, reducing iterations, and eliminating inspection delays.

Visit www.level3inspection.com or call us today to discuss how an in-house, archiving CAI system can suit your needs.

WARSAW, IN • STUART, FL
574.383.9145 • 561.775.7911
Copyright © 2011 Level 3 Inspection LLC, All rights reserved.

Computer Aided Inspection: The Future of GMP

Integrating 21st century metrology into FDA-mandated quality systems provides many benefits.  Here are just a few…

In our three years serving the medical device industry, we at L3I have closely studied the FDA’s exacting Good Manufacturing Practice (GMP) and quality system requirements in light of our many prior years of experience serving the aerospace industry.  Aerospace manufacturers, being just as tightly regulated as medical device manufacturers, already know the many advantages that Computer Aided Inspection (CAI) can provide in their ongoing efforts to build better engines and airfoils at a faster turnaround.
 
We’ve narrowed the many advantages of CAI to six broad categories of greatest interest to medical device manufacturers.
 
Advantage: Benefit:
Secure and Archiveable CAI tools save comprehensive surface data instantly. You can keep your measurement data for decades, ensuring a lasting command of your company’s legacy intellectual property for future revisions or study. This also simplifies the process of ensuring compliance with the strict and changing archive requirements imposed by many countries.
Auditable for regulatory inquiries Given correct information technology practice, CAI data are immune from tampering. When secured in a database that cannot be changed once logged, you have incontrovertible evidence of a watertight quality system when FDA inspectors knock on your door. If necessary, CAI can allow you to prove that every surface point of your product was within spec at every point during manufacture.
Traceable for staff accountability Gauge R&R studies demonstrate that CAI incorporates no operator-dependent error. All manufacturing and quality personnel can be held accountable for their respective step in recording engineering data. Every step in manufacturing is linked to a comprehensive dimensional inspection process, and no measurements are taken by anonymous users.
Trackable for failure analysis CAI allows manufacturers to track inspection data through the process to find the root causes of failures systematically, rather than by trial and error. Intelligent surface data analysis provides quick and effective tracking from why-gate through why-gate. There is no longer any need (or excuse) for multiple iterations.
SPC Trendable CAI data are immediately and continuously transferable into statistical process control (SPC) frameworks. By trending dimensional changes, manufacturers can catch emerging anomalies before they grow into costly problems. And by driving these new insights upstream into design, prototyping, and tooling, manufacturers can improve their understanding of tool and machine wear, reducing the frequency of planned shutdowns.
Admissible in litigation High-profile court cases (based on questionable premises) have proliferated against the industry in recent years. With Computer Aided Inspection (CAI) data, manufacturers now have a powerful defensive tool in depositions or the courtroom. CAI provides incontrovertible evidence that every surface point of your part was within spec, when questioned by plaintiffs’ attorneys.

Over the next several months, we’ll be sending a series of informational messages to elaborate on these advantages to help our medical device friends and partners move forward into comprehensive integration of CAI into their processes and workflow.

Visit www.level3inspection.com or call us today to learn more!

WARSAW, IN • STUART, FL
574.383.9145 • 561.775.7911
Copyright © 2011 Level 3 Inspection LLC, All rights reserved.

FDA’s Five Year Plan: Doing More with Less

The FDA recently unveiled its Strategic Priorities 2011-2015.

How will the next five years’ goals and objectives affect you?

Everybody’s operating under a tighter budget these days.  “Lean government” has become a buzzword.  Even the politicians finally seem to have noticed lean processes that manufacturers have been studying and implementing for decades.

The FDA has noticed, too.

To serve the FDA’s objectives of efficiency, consistency and effectiveness, industry is being asked to revisit the way that processes are developed and documented — standardizing the enormous amounts of product data that manufacturers send in.  Ever more responsibility is shifting to the medical device industry to track data on its outsourced supplies.

With accurate and comprehensive computer-aided inspection (CAI) you can satisfy regulators by recording and documenting every surface data point and every extracted dimension for future reference — while cutting iterations, months, and millions of dollars from the process development schedule.

Visit www.level3inspection.com or call us today to learn more!

WARSAW, IN • STUART, FL
574.383.9145 • 561.775.7911
Copyright © 2011 Level 3 Inspection LLC, All rights reserved.

MENU