Mailings Archives - Page 3 of 5 - Level 3 Inspection

Archive for the ‘Mailings’ Category

Product Modernization­™ … it’s reverse engineering for grown-ups. (Aerospace)

Got a complex legacy part? Need a good CAD model fast?
Call Product Modernization Associates at 561.775.7911 today for a quote!
Receive a fully-parametric feature-based model for the CAD platform of your choice
… in just days.

Click here to learn more.

Product Modernization­™ … it’s reverse engineering for grown-ups.

STUART, FL • WARSAW, IN
561.775.7911 • 574.383.9145

Copyright © 2011 Level 3 Inspection LLC, All rights reserved.

Product Modernization­™ … it’s reverse engineering for grown-ups. (Medical Devices)

Got a complex legacy part? Need a good CAD model fast?
Call Product Modernization Associates at 561.775.7911 today for a quote!
Receive a fully-parametric feature-based model for the CAD platform of your choice
… in just days.

Click here to learn more.

Product Modernization­™ … it’s reverse engineering for grown-ups.

Copyright © 2011 Level 3 Inspection LLC, All rights reserved.

L3I Unveils Time-To-Market Outcome Based Partnership

Level 3 Inspection —
Process Optimization with TTM Reduction for Better Parts, Faster.
L3I Unveils Time-To-Market Outcome Based Partnership (OBP)

WARSAW, Ind., August 9, 2011 — Level 3 Inspection LLC (L3I), an ISO 9001, AS9100 and AAAM 44.9 certified process engineering and dimensional inspection firm, has announced a 21st-Century Outcome Based Partnership (OBP) hybrid business model based on proven time-to-market (TTM) savings.
In competitive precision industries like medical devices, aerospace and industrial gas turbine (IGT) engines for power generation, each day’s delay in TTM can cost the manufacturer hundreds of thousands or, in extreme cases, millions of dollars.  Faster product development and revision yields both short-term savings and long-term first-mover market advantage.
Long known for professional contract-based metrology and advanced dimensional inspection reports on quick turnaround, L3I is now offering comprehensive OBP-based process optimization services to help its precision manufacturing clients reduce TTM and roll out innovations sooner than their competitors.
Based on decades of expertise in applying the latest inspection and process-control tools to stubborn engineering and product development problems, L3I examines the entire development life cycle.  L3I’s direct and comprehensive problem-solving approach weighs structural flaws against the short-term and long-term bottom lines, identifies extraneous process iterations, and recommends time- and cost-cutting solutions.
“Our top orthopedic and aerospace clients are renowned in their markets for innovation,” said L3I CEO, Bill Greene.  “They’ve accomplished this in large part through a TTM advantage – they’re able to introduce the latest innovative technologies and practices ahead of the competition.”
To ease the transition for companies that are unaccustomed to the process optimization advantage that can be gained from computer-aided inspection, L3I is offering zero-money-down OBP’s.  Per agreement, L3I becomes a strategic ally, paid a share of time and cost savings due to TTM process optimization only after such savings have been demonstrated.
“Studies have proved that L3I’s system and method of inspection for implants is as accurate or better than our CMM’s. Since the white light scanning processes have the required accuracy and can cover so much more of the feature surface, their data is a more accurate representation of true size and form.” –  Metrology Director, Orthopaedic OEM
Further information can be obtained at 561-775-7911 or sales@level3inspection.com.
About the companies:
Founded in 2008, L3I has become the world leader in WLS and CAI dimensional inspection services. Our background serving the biggest names in aerospace and medical device manufacturing gives us an unrivaled understanding of dimensional fit against geometric form according to print and functional requirements. Learn more at www.level3inspection.com.
Smart Inspection Systems LLC was born in 2010 in response to orthopaedic manufacturers’ demands for faster inspection than their sister industries. Our flagship product, the SiS™, is an automated turnkey inspection solution that yields comprehensive visual reports with complete geometric form and dimensional pass/fail in just minutes. The SiS™ is custom-configured per the client’s needs, yet versatile enough for simultaneous use on multiple product lines. Learn more at www.smartinspectionsystems.com.
Copyright © 2011 Level 3 Inspection LLC, All rights reserved.

Your Source For Vendor Qualification

Level 3 Inspection and Smart Inspection Systems
Watch our YouTube video

Verify Your Supply Chain Vendors

It’s a global parts market.  As a leading precision manufacturer, you have hundreds of suppliers (in the United States and beyond) to choose from for your outsourced parts.  But in a competitive and high-stakes industry, in which tolerances can be as minute as a few ten-thousandths of an inch, it’s critical that supply-chain parts be faithful to model and print.

The supply chain is a cost-effective source of small or simple parts, but quality assurance is an ongoing challenge.  Trial-and-error verification of every new supplier is an expensive proposition.

So how can you be confident in your stream of supply chain parts, without breaking the bank and wasting valuable time?

Fast & Economical

Avail yourself of fast, modern, and economical Computer Aided Inspection (CAI) by a credentialed, independent and impartial third party.  Level 3 Inspection is an ISO 9000, AS 9100 and AAAM 44.9 certified engineering and inspection firm, and is among the world’s most competent practitioners of White Light Scanning (WLS)-based CAI.
In addition to contract inspection solutions, we also offer custom-configured systems.  Learn about our SmartInspectionStation™ (SiS™) by watching our YouTube video.

Objective Data, Smartly Managed

By coupling accurate and comprehensive surface scans with intelligent postprocessing, we can provide an objective, clear, and easy-to-understand index of part data, helping you choose quickly and easily from between part suppliers. And by tracing, tracking and trending the data over time, we’ll help you sustain a reliable supply of reliable parts – inexpensively!
Call 561.775.7911 today to schedule a discussion of application parameters and configuration criteria with an L3I engineer.
Copyright © 2011 Level 3 Inspection Midwest LLC, All rights reserved.

A New Paradigm in Orthopedic Cutting Tool Inspection

Level 3 Inspection and Smart Inspection Systems
Watch our YouTube video

Top Cutting Tool Performance

Given the rise of global supply chain competition, along with the projected annual growth rate of 8-10% in the worldwide medical device industry market, U.S. medical device manufacturers must continue their course of innovation.  Best practices, though crystallized, must constantly be reevaluated and revised where appropriate.

With literally hundreds of suppliers across the United States capable of producing spinal and TJR instrumentation, competition for lucrative OEM contracts is fierce.  Implant success depends on a number of factors – among which are the size, depth, and position of the hole in the bone.

So how can you make sure that your broaches and reamers will perform to an exceptional standard?

FORM before FIT

Cutting tool quality is critical and can depend on accuracy and truth-to-form of only a few thousandths of an inch.  Nonstandard or unanticipated wear patterns can have catastrophic consequences.  You as a manufacturer deserve the peace of mind of knowing the full geometry of your tooling – and not merely a few key dimensions.
Gain the Confidence of the Entire Geometry

Overseas suppliers have demonstrated a great willingness to apply inspection methods based on geometric form, and some are beginning to pull ahead of American manufacturers.  Why risk losing the best supplier contracts to other manufacturers by taking a trial-and-error approach to tooling development?
A Call to Action

Given the precarious situation in which the medical device industry finds itself – opportunity in exploding overseas markets coupled with threats from overseas competitors – there’s never been a more critical time to reexamine cherished misconceptions about what constitutes a reasonable standard of speed and quality in tooling development.  First movers will dominate share in their product category – perhaps permanently.  Let’s work together that they may continue to be fellow Americans.

Learn about the SmartInspectionStation™ (SiS™) by watching our SmartInspectionStation™ YouTube video.

Call 561.775.7911 today to schedule a discussion of application parameters and configuration criteria with an L3I engineer.
Copyright © 2011 Level 3 Inspection Midwest LLC, All rights reserved.

The Time-to-Market Advantage

Level 3 Inspection and Smart Inspection Systems
Watch our YouTube video.

Orthopedics is a competitive market with projections of 8-10% global annual growth over the next several years.  As such, best practices have crystallized over the years and decades.  American manufacturers can’t afford to ignore opportunities to reduce new product development time by 30% or more — and improve product revision rates by upwards of 50+%!

If you snooze, you lose.

As you probably know, good design in total joint replacements depends on good geometric understanding.  Engineering misjudgments of mere microns can ruin the outcome of a joint replacement – resulting in expensive recalls, product scrapping, and lost time in product development.
In product manufacturing process development, a trial-and-error approach to form and function can result in dozens of redundant and ineffective iterations where one or two well-founded iterations might have been sufficient.  This is all to common in some major American orthopedic companies.
Foreign competitors throughout precision manufacturing – especially but not exclusively what we increasingly refer to as “Brand China” – have proved themselves receptive to new ways of improving part quality, while still decreasing cost, weight and time to market.  As we’ve seen in other industries, if foreign manufacturers gain the lead over their American counterparts, they won’t give it back.
And domestically, as Don Urbanowicz explained in his keynote address at the OMTEC 2011 trade expo, forthcoming changes in FDA regulatory policy will increase the “First Mover Advantage” still further.
Discover your custom-configured inspection options by watching the

There’s ground to be gained … or lost.

Given the double-edged situation in which the medical implant industry finds itself in 2011 – facing an opportunity in exploding overseas markets but also a potential threat in overseas competition – there has never been a more critical time to examine cherished misconceptions about what we can expect of product development speed.  First movers will dominate share in their product category – perhaps permanently.  Let’s work together that they may continue to be fellow Americans.


Learn more today.

Call 561.775.7911 today to schedule a discussion about application parameters and configuration criteria with an L3I engineer.

Copyright © 2011 Level 3 Inspection Midwest LLC, All rights reserved.

Invitation — See the SiS™ during OrthoTec 2011!

INVITATION — OrthoTec 2011
SiS™ Demo and Lab Tour

Come and see us demonstrate the SiS™ at our Warsaw, Indiana lab!
Can’t see the video? Click here.

We’ve already proudly announced the unveiling of the Smart Inspection Station™ (SiS™) at OrthoTec 2011 in Winona Lake, Indiana.
Here’s your official invitation to join L3I in our Warsaw laboratory to see the SiS™ in action.
Please visit us at Booth 200 on the OrthoTec exposition floor, where we’ll be displaying and demonstrating our DT-1™ scanner.  This will be your opportunity to meet the L3I management and staff, and to sign up for the demonstration and tour time that best suits you.
We’ll be providing transporation to and from our lab (3123 East Center Street — only minutes from the expo floor).  Refreshments will also be provided.  The demo and question-and-answer session will take about 45 minutes, after which you’ll be whisked back to OrthoTec.
Additionally, we’ll be hosting an open house and cocktail hour on Tuesday, May 24 from 5:30 p.m. to 7:30 p.m. for those who can’t attend one of our organized tours during the day — or who simply wish to linger with us.
See you at the show!

Sincerely,

Bill Greene, CEO
sales@smartinspectionsystems.com
Direct: 561.775.7911

Level 3 Inspection • Smart Inspection Systems
STRATEGIES • SOLUTIONS • SYSTEMS • SUPPORT
AS9100 & ISO9001 Registered • AAAM 44.9-2010 Certified • CAGE Code 5UXW8
Stuart, FL 34997 • Warsaw, IN 46582

Please consider the environment before printing this email.

This message and any attachments are intended only for the named recipient(s) and may contain confidential, privileged or otherwise legally protected information.  Unauthorized disclosure of, or taking any action in reliance upon this information by others than the named recipient is prohibited.  If you have received this message in error please inform the sender and purge from all computers.
Copyright © 2011 Level 3 Inspection Midwest LLC, All rights reserved.

Press Release — Level 3 Inspection Unveils Turnkey Smart Inspection System™ at OrthoTec

PRESS RELEASE (Source: eReleases)
Meet us at OrthoTec — Booth 200, May 24-25, 2011
Level 3 Inspection Unveils Turnkey Smart Inspection System™ at OrthoTec
WARSAW, Ind., May 12, 2011 /PRNewswire/ — Level 3 Inspection LLC (L3I) of Florida and Indiana, an ISO 9001, AS9100 and AAAM 44.9:OI/OS certified process engineering and dimensional inspection firm, has announced that the Smart Inspection Station™ (SiS™) will be unveiled at the OrthoTec exposition in Winona Lake, Indiana, May 24, 2011.

Long known for its professional metrology services and advanced dimensional inspection reports on quick turnaround, L3I has just expanded with a turnkey solutions division, Smart Inspection Systems LLC, to custom-configure and implement modern inspection systems directly in orthopaedic and other precision manufacturers’ facilities, so manufacturers can obtain needed inspection results in minutes.

“We’ve been listening intently to what our clients want in order to adopt this 21st-century measurement and inspection technology,” said L3I CEO Bill Greene. “The SiS™ is the culmination of our 11 years’ experience with these technologies. With its configuration options, ease, speed and automation, it’s an ideal platform for shop floor precision parts inspection.”

The SiS™ is an easy-to-use White Light Scanning (WLS) and Computer Aided Inspection (CAI) system that orthopaedic and other precision manufacturers can install practically anywhere in their operations. It uses fringe-light patterns to digitize the surfaces of orthopaedic implants and other precision manufactured parts, automatically generating full PDF inspection reports with minimal operator input and personnel training.

WLS provides a thorough understanding of geometric form, with millions of data points across the surface. “Studies have proved that [L3I’s] system and method of inspection for implants is as accurate or better than our CMM’s. Since the white light scanning processes have the required accuracy and can cover so much more of the feature surface, their data is a more accurate representation of … true size and form.” – Metrology Director, Orthopaedic OEM

Measurement Systems Evaluations (MSE) and Gauge Repeatability and Reproducibility (GR&R) studies have consistently demonstrated measurement accuracies of 0.000040″. These reports are available upon request.

Although the SiS™ is fully transportable and able to withstand the rigors of shop floor deployment, L3I will shuttle participants between the OrthoTec expo and its central Warsaw configuration laboratory for scheduled 15-minute demonstrations on May 24th and 25th. Transportation and refreshments will be provided.

Further information can be obtained at 561.775.7911 or warsaw@level3inspection.com.

About the companies:

Founded in 2008, L3I has become the world leader in WLS and CAI dimensional inspection services. Our background serving the biggest names in aerospace and medical device manufacturing gives us an unrivaled understanding of dimensional fit against geometric form according to print and functional requirements. Learn more at https://www.level3inspection.com.

Smart Inspection Systems LLC was born in 2010 in response to orthopaedic manufacturers’ demands for faster inspection than their sister industries. Our flagship product, the SiS™, is an automated turnkey inspection solution that yields comprehensive visual reports with complete geometric form and dimensional pass/fail in just minutes. The SiS™ is custom-configured per the client’s needs, yet versatile enough for simultaneous use on multiple product lines. Learn more at http://www.smartinspectionsystems.com.

Contact:

Bill Greene, CEO
sales@level3inspection.com
Direct: 561.775.7911

Level 3 Inspection • Smart Inspection Systems
STRATEGIES • SOLUTIONS • SYSTEMS • SUPPORT
AS9100 & ISO9001 Registered • AAAM 44.9-2010 Certified • CAGE Code 5UXW8
Stuart, FL 34997 • Warsaw, IN 46582

Please consider the environment before printing this email.

This message and any attachments are intended only for the named recipient(s) and may contain confidential, privileged or otherwise legally protected information.  Unauthorized disclosure of, or taking any action in reliance upon this information by others than the named recipient is prohibited.  If you have received this message in error please inform the sender and purge from all computers.

Copyright © 2011 Level 3 Inspection Midwest LLC, All rights reserved.

What is Product Modernization™? (Precision Manufacturers)

L3I is making a big splash in 2011 with the SiS.

Discover the full potential of WLS by trying Product Modernization™.

This isn’t
“reverse engineering”…

You might have had “reverse engineering” offers before.  But how do you know what you’re getting?
At best, you can contract a metrology company to subject your legacy part to inaccurate laser scans or dimensional spot checks with point scanners.  At worst, they might resort to series of subjective caliper checks — or even an arbitrary CMM program.

… it’s
Product Modernization™.

With Product Modernization™, Level 3 Inspection generate and validate a fully parametric, feature-based CAD model that takes into account the entire part surface based on true White Light Scan (WLS) data accurate to within 0.000004” (0.1 microns).
Why hire people with calipers?  L3I can make and validate a CAD model that you can trust … at lower overall investment.
 

Thought Leaders


We at L3I are among the best in the world at generating fully parametric feature-based CAD models from ultra-accurate white light scan data.  We cut our teeth in aerospace, and we’ve become widely recognized as a thought leader in CAI-facilitated design.  We’re fully cognizant of precision manufacturers’ need for ultra-accurate, reliable, cost-effective and fast information.

Call an L3I engineer today at 1-888-4AS-9102 x121.  We stand ready to help you:

  • Generate accurate prints based on all avaliable surface data
  • Create functional models and/or assemblies based on thorough understanding of design intent
  • Fabricate new production tooling components
  • Reduce revision time for existing products by 55-85%
  • Streamline regulatory evaluations in your existing parts – saving time, money and headaches
Level 3 Inspection
Stuart, Florida
● Warsaw, Indiana
21st Century Measurement & Inspection
Technologies – Services – Systems – Solutions
Network with us:    
L3I on LinkedIn    Friend L3I on Facebook
Copyright © 2011 Level 3 Inspection LLC, All rights reserved.
MENU