Updates & News - Page 11 of 14 - Level 3 Inspection

Orthopedic Implants

Orthopedic Implants
Orthopedic implant devices are some of the most challenging parts to inspect using traditional methods; until now. Level 3 Inspection can use White Light Scanning (WLS) with computer-aided-inspection (CAI) to compare the orthopedic components to the CAD model, other components and/or the product die. This technology gives our customers a new and profound insight into the size shape and geometric conformance of their products that they have never had before. By inspecting the entire surface of these components Level 3 can help their customers significantly reduce errors, control quality and dimensional consistency.
Level 3 Inspection’s SmartCompare and SmartFAI process gives their customers the ability to identify problems with a particular area of the part and focus efforts to improve problem areas without spending time and resources on areas that are known to be conforming. This is especially helpful when dealing with critical medical components, such as implants and broaches or rasps. The ability to quickly compare the product to the nominal CAD model as well as the ability to compare the products from multiple lots gives Level 3 Inspection’s customers an advantage in regard to quality control and time to market.
The Level 3 approach replaces traditional plate inspection or a CMM system with WLS, which can capture and calculate precise 3D, coordinates for millions of points in minutes.
CMM captures only a few points in the time that WLS can capture hundreds of thousands, so Level 3 is able to do a more thorough inspection. The results are much more visual and therefore much more easily understood and interpreted.
Inspecting medical implant devices with complex free form geometry poses some unique challenges, such as analyzing the complex surface areas of a newly manufactured part compared to the CAD model. This is difficult using a CMM system, which depends on the operator to accurately capture the points that will show whether or not the part is conforming within the allowable tolerance. Often, there is not enough point data to make an accurate comparison.
The new capabilities provided by computer-aided inspection have not come a moment too soon for the competitive biomedical implant device market. Increasingly, companies are facing the demand for more quality inspection results in less time, with the ability to visualize the results.
Level 3 Inspection’s customers are moving quickly to statistically based inspections in which the qualification is based not on a single piece, but on a sampling of parts, new part inspection would take much longer to complete without the ability to automate portions of the process.
Traditionally, studies based on a sampling of parts are done using CMM to generate metrics on dimensions for each part. This is a time-consuming process, since each part must be measured individually. Data is then typically transferred to an analytic program, evaluated, then published.
Level 3 is replacing the CMM-based process with automated trend analysis. Once a part is scanned and a report is saved, Level 3 can automatically generate portions of the capability studies defined by their customer or OEM specifications. Batch processing enables Level 3 to collect data and generate reports on a large number of parts. Statistical analysis tools allow Level 3 to compare parts for pre-defined factors such as repeatability, changes over time, and variations from part to part.
Speed is the key. Speed of inspection is always Level 3 Inspection’s main challenge. Everyone wants the results yesterday and our process is helping us deliver more complete results much quicker.
Contact us today to start getting superior inspection results in shorter time with easier understanding leading to higher confidence

WLS & CAI Applications In Orthopaedic Industry

Applications of White Light Scanning (WLS) & Computer Aided Inspection (CAI)
Ideas from Orthopaedic Industry Client Meetings, Projects & Discussions
Level 3 Inspection has pioneered the use of WLS and CAI technologies, combined with our component design and fabrication process expertise to deliver very advanced dimensional inspection capabilities. We are grateful for the variety of project opportunities we’ve received, and welcome any projects and all challenges to serve you.
Whenever we meet with clients we receive very enthusiastic suggestions about how our technologies and services can be used to solve problems. Several application ideas have been raised, and completed with rave reviews.
Biomedical and Orthopedic Parts we’ve successfully inspected:
  • Hip Stems
  • Hip Broaches
  • Acetabular Shells
  • Humeral Bearing Head – Shoulder
  • Complex Custom Screws
  • Foam Block Machine Tests
  • Knee/Femur Parts
  • Elbow Joints
  • Spinal Implants
  • Polymeric/Nylon Inserts
  • Wax Patterns
  • SLA Patterns
  • Cranial Drills
  • Tooth Implants (ceramic)
  • Device Components (bushings, extensions)
WLS & CAI Applications & Opportunities (examples not limitations)
  • Broach wear trending to show the rate of wear over usage life (& beyond)
  • CAD Model Creation – broach machining model, legacy parts, competitors parts, etc.
  • CNC Machine Program validation, new parts & legacy parts, with & without CAD models
  • FAI of Custom Implants & Joints
  • FAI of New Production runs, other parts of interest
  • Head Fragment Reconstruction
  • Investment Casting process inspection from tooling through FAI to Production Sampling
  • Instrument Services where some of vendors are delivering you less than perfect tools
  • Locking Feature Inspection
  • Parts & Tools that return from the field & need to be geometrically analyzed
  • Parts with Plasma-Deposition PA&HA coating – thickness measurement to show uniformity & deviation in the coating layer(s), surface finish calculation
  • Potted Hip Stems Alignment & Depth measurement
  • Production Tooling – direct wax die inspection for new acceptance or rework validation before you spend the time & investment to make castings
  • Statistical Process Control – Identifying the appropriate inspection schedule & sampling rate
  • Vendor comparison & Supply Chain Quality Problem Resolution
  • Absolutely anything where comprehensive & ultra-accurate surface digitization is important.
Level 3 Inspection offers technical services for proving out the application of these technologies and supporting developing an investment justification with actual results and financial benefit. Once the technical tools have been shown to have a business benefit, a WLS/CAI system can be specified, developed, proposed and implemented for your own use. We are structured to represent/resell, integrate, develop processes and file management solutions, train and support all of these technologies. We believe our 9+ years of parallel experience and expertise with these tools will serve you well. And we think the best way to get these applications proved out is to use our services to show the practicality they hold. Thanks in advance. We look forward to working with you.

Press Release – L3I Receives Prestigious Governor’s Award

Level 3 Inspection Receives Prestigious Governor’s Business Diversification Award
Program honors outstanding business contributions to Florida’s economy
STUART, FL(September 1, 2010) – Level 3 Inspection LLC is one of just 18 Florida companies to receive the Governor’s 2010 Business Diversification Awards for exceptional contributions toward statewide economic diversification. The award recognizes successful job creation and distinctive community involvement and investment efforts, many of which fall into industries Florida targets for economic diversification and high wage job growth. L3I was one of just three companies to win the Governor’s Entrepreneurship Award for Floridastart-up companies less than five years old, that have set a standard for entrepreneurship and creativity.
“We are very appreciative of this state-wide recognition for our rapidly growing business, and this will support our further expansion to better meet our client’s needs. We’re also quite pleased with the top-caliber of professional talent we’ve been able to attract here and the supportive business environment we’ve come to enjoy in Martin County.” said Bill Greene, CEO . “This is a great base of operations for our national and global high-precision dimensional inspection services and advanced computer automated inspection systems business.”
“This business award is a testament to a strong base of innovation and entrepreneurship that thrives in Martin County.” remarked Ron Bunch, executive director of the Business Development Board of Martin County (BDBMC), who expressed his support to the Governor. “We are extremely proud of Level 3 Inspection for their outstanding impact on the economy of Martin County and their dedication to innovation and expansion. We wish them much continued success.”
The awards will be presented September 22 in Tallahasseeduring Florida Governor Charlie Crist’s annual Industry Appreciation Week. The BDBMC will host a luncheon on September 24 to recognize the many contributions of local companies in targeted sectors.
* * *
Level 3 Inspection, LLC (Entrepreneurship Award) – Martin Countywelcomed Level 3 Inspection to the county this year, when the company announced plans to hire up to 33 new employees and invest nearly $1M in its new location at Sawgrass Business Center. Level 3 Inspection is the world’s most proficient user of the 21st century measurement and inspection technologies of 3D White Light Scanning (WLS) and Computer Aided Inspection (CAI). The company pioneered much of the development of these tools, for world-class OEM and supply chain clientele. Level 3 Inspection boasts multiple patent applications already in process. www.level3inspection.com
The Business Development Board of Martin County (BDBMC) is the county’s official economic development organization, and Enterprise Florida, Inc. partner. More information about the organization can be found by visiting www.bdbmc.org
Enterprise Florida, Inc. is a partnership between Florida‘s business and government leaders and is the principal economic development organization for the state of Florida. Headquartered in Orlando, EnterpriseFlorida’s mission is to diversify Florida’s economy and create better-paying jobs for its citizens by supporting, attracting and helping to create businesses in innovative, high-growth industries. In pursuit of its mission, Enterprise Florida works closely with a statewide network of economic development partners. www.eflorida.com

Press Release – L3I Receives Entrepreneurship Award

Contact: Stuart Doyle
(407) 956-5689
sdoyle@eflorida.com
18 Florida companies to receive Governor’s Business Diversification Awards
Annual program honors outstanding contributions Florida’s economy
ORLANDO, FL (August 31, 2010) – Eighteen Florida companies representing 12 counties will receive 2010 Governor’s Business Diversification Awards for exceptional contributions they made last  year toward statewide economic diversification.
The award recognizes successful job creation and distinctive community involvement and investment efforts, many of which fall into industries Floridatargets for economic diversification and high wage job growth: aviation/aerospace, cleantech, financial/professional services, homeland security/defense, information technology, life sciences and manufacturing. Eighty-five companies competed this year.
The awards will be presented September 22 in Tallahassee during Florida’s annual Industry Appreciation Week (the third week of September).
The competitors vied for awards in six categories:
  • Business Expansion – companies that expanded operations in 2009, investing capital and creating jobs for Floridians.
  • Entrepreneurship – start-up companies (less than 5 years old) that have set a standard for entrepreneurship and creativity.
  • Export Excellence –companies with a significant increase in documented export sales in 2009.
  • Innovation – companies, organizations or institutions that through product or process best exemplified innovative leadership in 2009.
  • Newcomer – For new-to-Florida companies that began operating in 2009.
  • Green-to-Gold – Florida companies, universities or other organizations that through product or process best exemplified “green” leadership as it pertains to the state’s goal to become a leader in this emerging field.
For award consideration, a business can self-nominate or a local economic development organization can submit a company. Each competes with other companies, organizations, universities and colleges in similar sized markets in categories includingMid Market (county population up to 150,000); Major Market (county population 150,001 to 800,000) and Mega Market (county population 800,001 and higher).
Below are this year’s winners listed by business category and market size:
Business Expansion
Mid Market: LiberatorMedical Supply, Inc. (Martin County)
Major Market: LibertyMedical Supply, Inc. (St. Lucie County)
Mega Market: The Boeing Company (Duval County)
Entrepreneurship
Mid Market: Level 3 Inspection, LLC (Martin County)
Major Market: TH@T Company (Lake County)
Mega Market: IT Authorities, Inc. (Hillsborough County)
Export Excellence
Mid Market: Gulfstream Aluminum & Shutter Corporation (MartinCounty)
Major Market: Symetrics Industries, LLC (Brevard County)
Mega Market: Nationwide Equipment (Duval County)
Innovation
Mid Market: UCT Coatings (Martin County)
Major Market: Lighting Science Group Corporation (Brevard County)
Mega Market: Mavericks in Education, LLC (Palm Beach County)
Newcomer
Mid Market: La Quinta Inn & Suites Hotel (Highlands County)
Major Market: Coast Products (Bay County)
Mega Market: BD Biosciences Advanced Bioprocessing (Miami-Dade County)
Green-to-Gold
Mid Market: Technology Conservation Group Inc. (Citrus County)
Major Market: BlueChip Energy (Seminole County)
Mega Market: Southern Waste Systems/Sun Recycling (Palm Beach County)
Here’s a breakdown of the winners by county.
County Winners CountyWinners CountyWinners
Bay 1
Highlands 1
Miami Dade 1
Brevard 2
Hillsborough 1
Palm Beach 2
Citrus 1
Lake 1
Seminole 1
Duval 2
Martin 4
St. Lucie 1
* * *
Enterprise Florida, Inc. is a partnership between Florida‘s business and government leaders and is the principal economic development organization for the state of Florida. Headquartered in Orlando, EnterpriseFlorida’s mission is to diversify Florida’s economy and create better-paying jobs for its citizens by supporting, attracting and helping to create businesses in innovative, high-growth industries. In pursuit of its mission, Enterprise Floridaworks closely with a statewide network of economic development partners and is funded both by the State of Floridaand by private-sector businesses.
#####

Press Release – L3I Receives Business Diversification Award

FOR IMMEDIATE RELEASE
Contact:
Crystal Stiles, Marketing & PR Manager
772-221-1380 office
772-341-2548 cell
crystal@bdbmc.org
Martin County Targeted Companies Receive Coveted
Governor’s Business Diversification Awards
Martin County
receives most awards in the state for third consecutive year
STUART, FL (August 31, 2010) – The Business Development Board of Martin County (BCBMC) today received word that four (4) Martin Countycompanies are recipients of the 2010 Governor’s Business Diversification Awards, a statewide program that recognizes Floridacompanies in emerging and high-technology industries for their contributions to Florida’s economic growth. Coordinated by Enterprise Florida, the awards presentation is held by the Governor annually during Florida’s Industry Appreciation Week (September 20-24, 2010) in Tallahassee.
The 2010 winners of Governor’s Business Diversification Awards from Martin County are UCT Coatings, Inc. in the Innovation category; Level 3 Inspection, LLC in the Entrepreneurship category; Gulfstream Aluminum and Shutter Corporation in the Export Excellence category; and Liberator Medical Supply, Inc. in the Business Expansion category.
Companies that vied for the Governor’s Business Diversification Awards competed with other companies, organizations, universities and colleges in markets similar to their own size. The market classifications were: Mid Market (county population up to 75,000); Major Market (county population 75,001 to 750,000); and Mega Market (county population 750,001 and higher).
Martin County was the only county in the state to have four award winners. This is the third consecutive year that Martin Countyhad more award winners than any other county in Floridaand the fourth consecutive year that Martin County companies received awards. In 2007, Elliott Energy MicroTurbines, now Calnetix Power Solutions, received the Governor’s Business Diversification Award in Export Excellence. In 2008, Sol, Inc. (Export Excellence); Advanced Technologies Group, Inc. (Innovation); and Ecosphere Technologies, Inc. (Green-To- Gold) received Governor’s awards in the noted categories. Winners for 2009 were Waterblasting Technologies, Inc. (Export Excellence); SystemsOne, LLC (Entrepreneurship); Seatorque Control Systems, LLC (Business Innovation); and CSA International, Inc. (Green-To-Gold).
“It is an unprecedented honor to have more award-winning companies that any other county in the state for the third consecutive year. This is a testament to a strong base of innovation and entrepreneurship that thrives in Martin County.” remarked Ron Bunch, executive director of the Business Development Board of Martin County, who facilitated applications for all the companies and authored letters of support to the Governor. “We are extremely proud of UCT Coatings, Level 3 Inspection, Gulfstream Aluminum, and Liberator Medical for their outstanding impact on the economy of Martin Countyand their dedication to innovation and expansion. We wish them much continued success.”
Governor Charlie Crist designated the week of September 20-24 as Business Appreciation Week. As part of the celebration, the BDBMC will host a luncheon on September 24 that will recognize the many contributions of local, existing companies from within targeted industry sectors. These companies provide quality jobs, help expand the local tax base and help drive positive economic activity in virtually all sectors of our local economy.
About the Award Recipients
UCT Coatings (Innovation) – A Florida company since 2000, UCT Coatings currently employs 40 people in their facility on Jack James Drive in Stuart. UCT Coatings’ surface engineering products transform the performance of hardware across many different marketplace segments. Its hard, durable, damage tolerant coatings are used in and are in development for the Defense, Forestry, Aerospace, Industrial Tooling, Oil & Gas, Automotive, Clean Energy, Marine, and Medical fields. A brand new state-of-the-art facility is being constructed in Palm City, FLthat is fully automated, large scale, and class-leading in all respects. New high paying, high tech jobs are being created and retained in the area to sustain operations, continue to develop new, valuable technology, and support the company’s growth. www.uctcoatings.com
Level 3 Inspection, LLC (Entrepreneurship) – MartinCounty welcomed Level 3 Inspection to the county this year, when the company announced plans to hire 33 new employees and invest nearly $1 million in its new location in Sawgrass Business Center. Level 3 Inspection is the most proficient user of the 21st century measurement and inspection technologies of 3D White Light Scanning (WLS) and Computer Aided Inspection (CAI). The company pioneered much of the development of these tools, for world-class OEM and supply chain clientele. Level 3 Inspection boasts multiple patent applications in process. www.level3inspection.com
Gulfstream Aluminum and Shutter Corporation (Export Excellence) – Gulfstream Aluminum has been in Floridasince 1979 and currently employs 50 people in Stuart. The company exports 15% of its manufactured hurricane shutters to the Caribbean and Bermuda. Gulfstream is active in the Martin County community, as members of the Stuart-Martin County Chamber of Commerce and Treasure Coast Builder’s Association. They have been family-owned and operated since their beginning over 30 years ago. www.gulfshutters.com
Liberator Medical Supply, Inc. (Business Expansion) – Liberator Medical Supply has announced two expansions in as many years in Martin County. Just this year, they leased Building 30 at Witham Field, invested significantly in building improvements, and added 171 new employees. This expansion brings their total employment to 209 full-time employees with hiring continuing. Liberator Medical was launched in 2000 as a mail order and retail medical supply firm, and is a wholly owned subsidiary of Liberator Medical Holdings, Inc. (OTCBB: LBMH). The company offers more than 5,000 products to Medicareeligible patient populations with chronic conditions requiring repeat orders of maintenance supplies. www.liberatormedical.com
About the BDBMC
The Business Development Board of Martin County is the county’s official economic development organization, and Enterprise Florida, Inc. partner. More information about the organization can be found by visiting www.bdbmc.org.
About Enterprise Florida
Enterprise Florida, Inc. (EFI) is a partnership between Florida’s business and government leaders and is the principal economic development organization for the state of Florida. Headquartered in Orlando, EFI’s mission is to diversify Florida’s economy and create better-paying jobs for its citizens by supporting, attracting and helping to create businesses in innovative, high-growth industries. In pursuit of its mission, EFI works closely with a statewide network of economic development partners and is funded both by the State of Florida and by privatesector businesses.
###

Jet Engine Parts

Jet Engine Components

More, better, faster is probably the mantra of every manufacturer, especially as it applies to quality inspection.

Level 3 Inspection has found a solution to the more-faster-better inspection dilemma. The company has implemented a SmartFAI process that combines White Light Scanning (WLS) with computer-aided-inspection (CAI).

The combination gives Level 3 the ability to perform more comprehensive inspections on parts in a shorter amount of time. The SmartFAI First Article Inspection (FAI) process involves verifying every feature on the part by comparing it to a customer-supplied part print and 3D CAD model. First-article inspections are done prior to full production release and often while a part is in development.
The Level 3 approach replaces traditional plate inspection or a CMM system with WLS, which can capture and calculate precise 3D coordinates for millions of points in seconds.
CMM captures only a few points in the time that WLS can capture hundreds of thousands, so Level 3 is able to do a more thorough inspection. The results are much more visual and therefore much more easily understood and interpreted.
Turbine blade inspection poses some unique challenges, such as analyzing the twist of a newly manufactured blade compared to the CAD model. This is difficult using a CMM system, which depends on the operator to accurately capture the points that will show whether or not the blade is twisted within the allowable tolerance. Often, there is not enough point data to make an accurate comparison.
Level 3 Inspection has the ability to automate twist analysis. Level 3 can align a cross-section of the scanned model to reference data, and automatically generate statistics on the twist of the blade. Constraints can be placed on maximum rotation and twist tolerance.

Level 3 also provides graphical inspection for turbine blade properties such as mean camber line; max thickness; LE and TE radius; thickness at offsets from the blade ends; wall thickness and chord length.

Level 3 Inspection’s customers are moving quickly to statistically based inspections in which the qualification is based not on a single piece, but on a sampling of parts, new part inspection would take much longer to complete without the ability to automate portions of the process.
Traditionally, studies based on a sampling of parts are done using CMM to generate metrics on dimensions for each part. This is a time-consuming process, since each part must be measured individually. Data is then typically transferred to an analytic program, evaluated, then published.
Level 3 is replacing the CMM-based process with automated trend analysis. Once a part is scanned and a report is saved, Level 3 can automatically generate portions of the capability studies defined by their customer or OEM specifications. Batch processing enables Level 3 to collect data and generate reports on a large number of parts. Statistical analysis tools allow Level 3 to compare parts for pre-defined factors such as repeatability, changes over time, and variations from part to part.
Speed is the key. Speed of inspection is always Level 3 Inspection’s main challenge. Everyone wants the results yesterday and our process is helping us deliver more complete results much quicker.
Contact us today to start getting superior inspection results in shorter time with easier understanding leading to higher confidence

Nuclear Parts

Nuclear Power Parts
In an industry where safety is paramount, the accuracy and thoroughness of the inspection are more important than ever.
Level 3 Inspection has found a solution to the this dilemma and has developed a SmartFAI process that combines White Light Scanning (WLS) with computer-aided-inspection (CAI).

The combination gives Level 3 the ability to perform more comprehensive inspections on parts in a shorter amount of time. The First Article Inspection SmartFAI process involves verifying every feature on the part by comparing it to a customer-supplied part print and 3D CAD model. First-article inspections are done prior to full production release and often while a part is in development.

The Level 3 approach replaces traditional plate inspection or a CMM system with WLS, which can capture and calculate precise 3D coordinates for millions of points in seconds.
CMM captures only a few points in the time that WLS can capture hundreds of thousands, so Level 3 is able to do a more thorough inspection. The results are much more visual and therefore much more easily understood and interpreted.
Nuclear containment and power generation inspection poses some unique challenges, such as analyzing the dimensions of a newly manufactured part compared to the CAD model. This is difficult using a CMM system, which depends on the operator to accurately capture the points that will show whether or not the part is conforming within the allowable tolerance. Often, there is not enough point data to make an accurate comparison.
The new capabilities provided by computer-aided inspection have not come a moment too soon for the increasingly competitive investment cast parts market. Increasingly, companies are facing the demand for more quality inspection results in less time.

Level 3 Inspection’s customers are moving quickly to statistically based inspections in which the qualification is based not on a single piece, but on a sampling of parts, new part inspection would take much longer to complete without the ability to automate portions of the process.

Traditionally, studies based on a sampling of parts are done using CMM to generate metrics on dimensions for each part. This is a time-consuming process, since each part must be measured individually. Data is then typically transferred to an analytic program, evaluated, then published.
Level 3 is replacing the CMM-based process with automated trend analysis. Once a part is scanned and a report is saved, Level 3 can automatically generate portions of the capability studies defined by their customer or OEM specifications. Batch processing enables Level 3 to collect data and generate reports on a large number of parts. Statistical analysis tools allow Level 3 to compare parts for pre-defined factors such as repeatability, changes over time, and variations from part to part.
Speed is the key. Speed of inspection is always Level 3 Inspection’s main challenge. Everyone wants the results yesterday and our process is helping us deliver more complete results much quicker.
Contact us today to start getting superior inspection results in shorter time with easier understanding leading to higher confidence.

Problem Solving

Problem Solving
Sometimes the most complex problems have the simplest solutions. Due to complex geometry and the lack of a CAD model our customer’s recent impeller rotational balance problem seemed pretty complex. Level 3 Inspection found a simple solution to this problem that did not require a CAD model and saved the customer time and money, all while improving product quality and time to market.

The key component for Level 3 Inspection White Light Scanning (WLS) combined with Computer Aided Inspection (CAI) software that enables them to perform a complete inspection of every type of shape and feature that characterizes an object, saving time and increasing inspection accuracy.

During the project to improve impeller balance, Level 3 deviated from standard practice that combines WLS and CAI with a CAD model for quality assurance. All processes currently start or end with a CAD model. Level 3 only used the WLS data – there are no CAD models used or created anywhere in the process.
Precision balance of impellers affects the operation and lifespan of every pump. The challenge for Level 3 was to reduce the time to balance impellers and increase material flow.
The standard process called for Level 3 to White Light Scan the impeller, align it to the CAD model and measure the dimensional deviations relative to the CAD model; A process that is time consuming and requires a CAD model. The time required to construct a CAD model was deemed too long by Level 3 Inspection’s customer
The alternate inspection process developed by Level 3 Inspection takes a relatively short amount of time and eliminates the need for a CAD model. Scans of the same impeller are imported into the CAI software twice, so that two copies of the scan exist in the same 3D space.
Within the CAI software, one object is rotated then a procedure called “fine adjustment best fit” is performed on the two copies, making a 3D comparison. Differences that affect balance are visible immediately.
At the time of this project, Level 3 was analyzing around four impellers a day, so the accumulative time savings over the course of a month using the new process amounted to several days. Those savings multiplied over the life of the project, which lasted about 18 months.
It’s a very simple process that reflects the essence of what needs to be measured: rotational symmetry. The underlying message is that WLS and CAI can have significant value for companies and industries even if they don’t rely on CAD models.
The greater volume of analysis in less time leads to faster learning curves, trends are more observable as are many units in succession as opposed to one at a time.
Besides speed, the new process delivered the ability to differentiate between casting-induced unbalance and machining-induced unbalance. Level 3 learned that machining-induced unbalance is relatively uncommon, but there is a big advantage in seeing and demonstrating it when it does happen. We are now able to use CAI visualizations to improve our suppliers’ machining processes and optimize part balance.”
The ability to identify wall thickness variance is another big breakthrough for Goulds Pumps. Variations in wall thickness are caused by differences in the shapes of the casting, mold and pattern tool.

Comparing scans of these three related objects within enables Level 3 to pinpoint the magnitude and source of variations. The process is so accurate that it can measure small differences in wall thickness due to molten metal flowing into and filling sand molds.

Level 3 can clearly show that sand castings are not necessarily perfect replicates of the molds from which they are produced; variation and its source can now be measured down to a level at which it is not economically viable to reduce any further. There is a huge value in knowing that we can control all important factors and be aware of other factors that we might not want to control for cost/benefit reasons.
The ability to quickly and accurately make direct measurements and comparisons of wall thickness has extended to other projects at Level 3. It’s helping to uncover potential production issues with older pattern tools that do not have associated CAD models.
Level 3 can scan the tooling pieces, assemble them electronically in CAI to create a scan model of the casting, and then compare the scan model to a scan of an actual production casting. Using several analysis processes along the way, Level 3 can identify all possible tooling issues and differentiate them from process-induced issues.
Although the benefits of WLS and CAI are sometimes difficult to quantify by numbers, they are nonetheless concrete. WLS and CAI has allowed Level 3 to see foundry process variation that could not be seen previously because of the complex geometries required for hydraulic designs. Level 3 can also ‘see through’ the complexity of the pattern tooling, and the sheer number of factors that influence foundry operations. With WLS and CAI, our customers can focus efforts on the factors that directly influence the quality of their castings.
MENU